Mega is a one-component waterborne 100% polyurethane finish for the

surface treatment of wooden floors in commercial and domestic areas

subject to heavy wear. As crosslinking is achieved using the oxygen in

the air, Mega has the performance of a two-component finish without

requiring any mixing. It has all the advantages of a waterborne system

and has a solvent content of approx. 5%.

• Easy to use – one component with userfriendly properties.

• High resistance to wear, scuff marks and scratches

• Very good chemical resistance

Type of finish: 1-component waterborne 100% polyurethane

oxygen crosslinking finish

Solids content: Approx. 32%

Viscosity: Approx. 17 sec. (25°C, FC4)

pH-value: Approx. 7.8

Resistance to wear: Approx. 5 mg/100 revolutions (SIS 923509)

Sheen (at 60°): Gloss: approx. 90, Silk Matt: 45-50, Matt: 25-30

Mixing ratio: The finish is 1-component

Drying time: 2½-3 hours at 20°C / 60% R.H.

Application tools: Roller, lacquer brush or applicator

Application rate: 8-10 m2/litre (120-100g/m2) per coat

Safety: Unclassified

Shelf life: 1 year from date of production in unopened

original container

Storage/transport: The temperature must not fall below +5°C or

exceed +25°C during storage and transport

Disposal: Wastes and emptied containers should be

handled in accordance with local regulations.