surface treatment of wooden floors in commercial and domestic areas

subject to heavy wear. As crosslinking is achieved using the oxygen in

the air, Mega has the performance of a two-component finish without

requiring any mixing. It has all the advantages of a waterborne system

and has a solvent content of approx. 5%.

• Easy to use – one component with userfriendly properties.

• High resistance to wear, scuff marks and scratches

• Very good chemical resistance

Type of finish: 1-component waterborne 100% polyurethane

oxygen crosslinking finish

Solids content: Approx. 32%

Viscosity: Approx. 17 sec. (25°C, FC4)

pH-value: Approx. 7.8

Resistance to wear: Approx. 5 mg/100 revolutions (SIS 923509)

Sheen (at 60°): Gloss: approx. 90, Silk Matt: 45-50, Matt: 25-30

Mixing ratio: The finish is 1-component

Drying time: 2½-3 hours at 20°C / 60% R.H.

Application tools: Roller, lacquer brush or applicator

Application rate: 8-10 m2/litre (120-100g/m2) per coat

Safety: Unclassified

Shelf life: 1 year from date of production in unopened

original container

Storage/transport: The temperature must not fall below +5°C or

exceed +25°C during storage and transport

Disposal: Wastes and emptied containers should be

handled in accordance with local regulations.